|Availability:||Regularly kept in stock. During busy season, we may not always guarantee stock.|
|Typ. Build Time:||If no units in stock. approximately 4-6 weeks from time of deposit. May increase relative to the amount of orders in our system.|
|Install Duration:||Typical Installs are approximately 2 hours.|
|Material Used:||1/8" / 0.125" Millplate or Checkerplate (Optional)
We use 5052-H32 Aluminum Plate & 6061-T6 Aluminum Extrusions. We also stock various mild and stainless steel.
|Standard E.T.V. Included||Optional||Customer Responsibility|
|PROVIDE PROTECTION FROM NATURAL ELEMENTS AND DUST||✓|
|PROVIDE NO-RISK WARMTH SUFFICIENT FOR GOOD CARE FOR THE INJURED - WORKER, WITH THE PATIENT HEATED ENOUGH TO MAINTAIN NORMAL BODY TEMPERATURE||✓|
|VOICE COMMUNICATION COMPATIBLE BETWEEN CAB & E.T.V.||✓|
|E.T.V. MUST BE CAPABLE OF TRANSPORTING AT LEAST ONE WORKER ON A STRETCHER||✓|
|E.T.V. MUST HAVE MEANS OF RESTRAINING A STRETCHER AND PREVENT JARRING||✓|
|INSIDE OF AN E.T.V. UNIT SHOULD CONTAIN THE FOLLOWING EQUIPMENT:|
|1 SET OF HARD CERVICAL COLLARS COVERING ALL ADULT SIZES (OR 2 - ADJUSTABLE HARD CERVICAL COLLARS)||✓|
|A LIFTING DEVICE WITH HANDHOLDS, ACCEPTABLE TO WORKSAFE BC, AND - SECURING STRAPS TO SECURE AN INJURED WORKER (SPINEBOARD)||✓|
|A STRETCHER TO TRANSPORT AN INJURED WORKER. THE STRETCHER MUST - HAVE RETAINER STRAPS AND A SUITABLE MATRESS OR PADDING||✓|
|2X LOWER LIMB SPLINTS, MINIMUM 1M IN LENGTH WITH SUITABLE PADDING||✓|
|2X VOMITUS BAGS||✓|
|Note: WorkSafeBC does not approve of any particular makes or models of emergency vehicles and does not register vehicles.|
|Note: Any order issued by WorkSafeBC Officer, or any other authoritive body immediately overrides this information and should be taken as your requirements.|
|Note: Seasonal outfits, or workers only operating during daylight hours may not require a heater. In any questionable conditions/temperatures, a heater is required.|
Notes & Features
Quality and longevity are necessary - The ETV I is manufactured from marine grade aluminum, which offers greater longevity and improved economy. TIG welding and high quality fasteners are used to assemble this well designed insert in order to optimize endurance.
Patient/Attendant comfort is important - The ETV I can be insulated with spray foam for noise reduction and climate stability. The ETV I can be heated with a forced air coolant heater. The ETV I is vented with a dual direction aluminum reef vent.
ETV Function is essential to you - The ETV I only uses the first half of your long-bed storage space, so you can still use the rear portion to carry fuel, chainsaw as well as other supplies and equipment.The ETV I is illuminated with an LED dome light for excellent light quality with minimal draw.
Patient/Attendant safety is imperative - Seat belts are standard for both patient and passenger, which exceed the CMVSS requirement for side-ways seating applications. The ETV I mounts to the front four existing engineered bed mounts on your pick up truck. It is designed to optimize space, while reducing blind spots. Both doors have standard RV style latches for internal and external access.